Filling and Securing
Filling and Securing
Filling and securing a TadBlu piece of memorial jewelry is very easy.
Just follow these 5 steps. You can also watch the videos.
![open pendant](https://www.tadblu-usa.com/wp-content/uploads/2021/09/Pendant-1-Open-Pendant.jpg)
Step 1
Open the ash chamber by unscrewing.
![Fill pendant](https://www.tadblu-usa.com/wp-content/uploads/2021/09/Pendant-2-Fill-Pendant.jpg)
Step 2
Fill the ash chamber with ashes, hair or other remembrance material.
![Wipe thread clean](https://www.tadblu-usa.com/wp-content/uploads/2021/09/Pendant-3-Wipe-Thread-Clean.jpg)
Step 3
Wipe the thread clean to make sure there is no residu on the thread.
![Apply 1 drop of jewelry glue](https://www.tadblu-usa.com/wp-content/uploads/2021/09/Pendant-4-Apply-1-droplet-of-glue-to-thread.jpg)
Step 4
Apply 1 drop of jewelry glue to the tread. Be sure to use jewelry glue. Jewelry glue will cure in about 2 hours.
Do not use instant glue that may cure before you have properly closed the ash chamber.
![Close pendant](https://www.tadblu-usa.com/wp-content/uploads/2021/09/Pendant-5-Close-Pendant.jpg)
Step 5
Screw the cap onto the ash chamber.